Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Sears Kenmore 385.18221 Manual De Instrucciones

Pressure Adjusting Lever
_i_ Pressure adjusting lever
The pressure adjusting lever should be set at "3" for regular
sewing.
Reduce the pressure to "2" for applique, cut work, draw
work and basting.
Set the pressure at "1" when sewing chiffon, lace, organdy
and other fine fabrics. Velour and knits with a lot of stretch
may also require the pressure at "1".
Presser Foot Lifter
_i_ Presser foot lifter
_2_ Normal up position
_3_ Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4" (0.6 cm) higher than the normal
up position for easy removal of the presser foot, or to help
you place heavy fabric under the foot.
Thread Cutter
_i_Thread cutter
You do not need a pair of scissors to cut the thread after
sewing. Simply use the built-in thread cutter.
Extension Table
• Detaching the table
Pull the table away from the machine, as illustrated, for
"free-arm" sewing of cuffs and sleeves.
• Attaching the table
Push the extension table until it snaps into the machine.
_i_ Extension table
_2_Pin
_3_Holes
_4_ Tab
_5_Free-arm
• Accessory box
Open the cover of the accessory box toward you. The
sewing accessories are conveniently located in the box.
f
/-
f
\\\\
\\\\\\\\\ ",
J
m
J
-x