Manual Buttonhole (Option); • Tosew - Sears Kenmore 385.18221 Manual De Instrucciones

Tabla de contenido

Publicidad

Manual
Buttonhole
(Option)
,_1_ Stitch selector:
_] (BH)
/2_ Stitch width:
3 to 6.5
_3_Stitch length:
0.25 to 1.0
@ Needle thread tension:
2 to 6
,_5_ Presser foot B:
Buttonhole foot
• Tosew
If the diameter of the button is more than 1.0" (2.5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
[] Set the stitch at" D" by turning the stitch selector.
[] Attach the buttonhole foot [ B] .
[] Pull the buttonhole lever downward as far as it will go.
[]Lower
the needle into the garment where the buttonhole
is to start, and lower the foot.
f
\J
l
,_4/,
¢
}_
_
WIDTH
0--1
--2--3=4=5_6,5
=
i
J
J
[] Sew the front bartack and left row, then stop.
[] Click the buttonhole lever toward you.
J
[] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [] and [] on
page 80.
J
-x
J
82

Publicidad

Tabla de contenido
loading

Tabla de contenido