Hofmann geodyna 8200 Manual De Operador página 182

a
b
c
d
e
f
2
182
7-9
1
7-10
3 4 5
7-11
Setting Parameters
7.7 Customer Data Entry
The "Customer Data Entry" function (Figure 7-9) is
used to fill in a customer/vehicle sheet to customise
the print reports prepared by the balancer after the
various operations.
The data can be entered either before or after the
measuring run. However we recommend entering and
saving the customer data screen before the service.
From the Main Screen INTRO SCREEN, select the
key (1, Figure 7-10);
the "Customer Data Entry" screen is displayed.
Data entry
 If possible before mounting the wheel, or before
performing a new lock after the run, recall the
customer data entry screen.
The data to be entered in the various fields is listed
below:
List of Data Fields
(Figure 7-9)
a Customer Name = Vehicle owner.
b Wheel
= Wheel commercial data.
c Rim info
= Rim commercial data.
d Type of vehicle =
e Plate = Vehicle number plate data
f Operator id = Name/ID operator
The keyboard used to enter the necessary text
appears. Once completed
 press ENTER.
 Press the save key (4, Figure 7-11) otherwise when
the unit is switched off the data will be deleted from
the memory definitively.
List of the Menu Items
2) Saves the customer data entered.
3) Goes back one step (UNDO).
4) Deletes all the data in the Screen.
5) Deletes the data of the last field.
Vehicle model
(Fig. 7-11):