Technical Specifications - Intelbras TIP 300 Guia De Instalacion

1. Technical specifications

WAN interface (Internet)
LAN interface (PC)
Signaling protocol
Codecs
Power supply
Power consumption
Dimensions
Weight
Operating temperatures
Operating humidity
Storage humidity
The TIP 300 and TIP 300 S support PoE technology and follow the IEEE802.3af norms.
1
Codec G722 (wideband) is responsible for HD Voice. However, in order to use high-definition voice,
2
the PABX must also support this codec.
Attention: this device uses VoIP technolgy, and the quality of its functioning de-
pends on traffic conditions and the priority of the network to which it is connected.
In the event of abnormalities during established calls, such as audio problems, first
contact your VoIP provider to check the status of its network.
Consult with your VoIP provider concerning which codec (voice coder/decoder) to
use and which settings are necessary for the TIP 300 / TIP 300 S IP telephone in
order to improve voice quality.
The TIP 300 S model is designed for the specific use in some PBX models. For fur-
ther information, refer to Intelbras through telephone number +55 48 2106 0006.
Should there be any doubt, please access www.intelbras.com.
38
10/100BASE-T 1 x RJ45 with PoE
10/100BASE-T 1 x RJ45
SIP v1 (RFC2543), v2 (RFC3261)
G722 (wideband) , G711 µ/A, G723, G726,
2
G729AB, GSM and iLBC
Input: 100- 240 VAC, 50-60 Hz
Output: 5 VDC , 1.2 A
1.4-2.6 W
195 x 150 x 152 mm
770 g
0-60 ºC
10% to 95%
5% to 90%
1