Rapid Dial Keys; Call Waiting; Three-Way Conferencing; Call Forwarding - Intelbras TIP 300 Guia De Instalacion

6.7. Rapid dial keys

To store numbers for the DSS keys (from 1 to 6), use the following procedure:
1. Press Menu and, using the
2. Use the
3. Use the
and press
4. Use the
;

6.8. Call waiting

If you are on a call (call 1) and the IP telephone receives an incoming call (call 2),
you will hear a warning beep and the LCD will show that there is an incoming call.
In order to answer the incoming call, follow the procedure below:
1. Press the
2. To return to call 1 and leave call 2 on hold, use the
the Hold key.
Note: consult with your VoIP operator about availability, and if the IP telephone
has the correct settings configured.

6.9. Three-way conferencing

While on a call, follow the procedures below:
1. Press Conference and then dial the number of the phone you wish to include
in the conference;
2. When that call is answered, the three-way conference will be established;
3. To exit the conference call, hang up.
Note: consult your VoIP operator about availability.

6.10. Call forwarding

To set up the forwarding of calls to another number:
1. Press Menu and, using the
2. Use the
3. Use the
Forward and press
48
keys to select DSS keys and press
keys to select which DSS key (from 1 to 6) you wish to configure
;
keys to select the options you wish to use for that key and press
key to put call 1 on hold and answer the incoming call;
keys to select Call Forward and press
keys to select Always Forward, Busy Forward or No Answer
;
keys, select Features and press
;
keys, select Features and press
;
keys and then press
;
;