Faucet And Sprayer Installation - Transform QL642 Manual Del Usuario

Installation (continued)

FAUCET AND SPRAYER INSTALLATION

Before installing, carefully unpack the faucet and ensure
no parts are missing .
1 . Insert the faucet shank, hose end and outlet
through the holes of the base plate and sink
accordingly .
2 . From underneath, slide the rubber gasket and
faucet shank nut over the end of the faucet shank,
then tighten the faucet shank by hand until it is
snug .
3 . Connect the hose end to the outlet . Then install
the weight to the hose in a good location so you
could easily pull our the faucet and replace it in its
original position easily .
4 . Connect the water supply lines (not supplied) to
the faucet .
Faucet shank
Base plate
Rubber gasket
Faucet shank nut
Weight
7
Please contact cs@conglomkb.com or 1-888-449-9197 for further assistance .
Faucet head
Outlet
Sink
Hose end
CONGLOMKB .COM