Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY NORM: There is a risk of fire if the extractor
is not kept clean.
To clean the appliance use a cloth dampened with
denatured ethyl alcohol.
The cleanning frecuency varies depending on the
intensity of use, nevertheless, it is recommended to
clean it every 2 or 3 weeks.
To clean the light screen (10) or to replace lamps, take
off the screen by smoothly pulling towards.
• The motor, propeller and all components should be
inspected periodically to ensure that they are not dirty
and have not suffered any damage. The frequency
of inspections depends on the appliance's operating
conditions.
• Remove the dirt on the propeller and the inner parts
of the casing to avoid imbalances during operation,
a decrease in aerodynamic performance and motor
damage.
• Changing the light:
Before changing the light make sure that the hood is
not connected.
Remove the grease filter and replace the light with a
light bulb no more powerful than that specified in the
Technical Characteristics. Place the filter in position.
• Cleaning the grease filter.
Depending on use, and at least once a month the
grease filters should be disassembled and cleaned in
a dishwasher or with hot soapy water.
If washed in a dishwasher, the filters should be placed
in an upright position to prevent food remains from
falling on them. After rinsing and drying, replace
the filters by following the steps for disassembly in
reverse order.
• The appliance does not require additional
maintenance.
Always demand original spare parts for repairs.
If you need any technical help or would like more
information about our products, please do not hesitate
to contact our official distributor.
THE MANUFACTURER reserves the right to
make any technological improvement or
modification without prior notification.
Publicidad
Tabla de contenido
