Commissioning And Temperature Setting - ARTEVINO Oxygen Serie Manual De Uso

Installing a shelf in display version:
To install bottles on a display shelf, proceed as follows:
1. Insert 2 runners in the shelf support strips. For each shelf, position one runner on the right and
one runner on the left (see diagram 1 and 2).
2. Place the shelf in the 2 runners. (see diagram 3)
3. Place a locking dowel in each of the 2 holes located at the front of the shelf, in the upper section.
These pins then fix the shelf with respect to the runner and prevent any unwanted movement.
4. Start by placing bottles in each recess of the back row with the base of the bottle towards the
back (6 traditional Bordeaux bottles).
5. Continue stacking the bottles on the back row
(6+6+6+6 = 24 traditional Bordeaux bottles), ensuring that no
bottles touch the back wall.
6. To display your bottles, place them vertically at the front of the shelf
(maximum capacity : 6 traditional Bordeaux bottles)
7. In display version, the shelf has a maximum capacity of 30
traditional Bordeaux bottles.
Installing a shelf in sliding version:
To install bottles on a sliding shelf, proceed as follows
1. Insert 2 runners in the shelf support strips. For each shelf, position one runner on the right and
one runner on the left. (see diagram 1 and 2).
2. Place the shelf in the 2 runners. (see diagram 3)
3. Place a locking dowel in each of the two holes located at the back of the shelf, in the upper
section. These pins prevent the shelf from sliding all the way out of the cabinet
4. Start by placing bottles in each recess of the back row with the base of the bottle towards the
back.
5. Continue by placing the bottles in the opposite direction on the front
row.
6. A sliding shelf can only hold a single row of bottles (maximum
of 12 traditional Bordeaux bottles).
7. In the case of a mixed layout, for optimal accessibility, we recommend
that you place the sliding shelves in the central section of the appliance.
NEVER PULL OUT MORE THAN ONE LOADED SLIDING SHELF AT A TIME.
Installing the specific grid for beverages
temperatures model - OXY2TVD6COUS)
1. Place a universal ArteVino shelf in the beverage center.
2. Place the grid on the ArteVino shelf (see diagram 4).
3. Install your bottles and cans upright on the grid.
NB: Additional information, for the small model only.
The small model is delivered with 2 shelves. 1 shelf fixed on runners + 1 shelf placed
on 2 fixed rack support pins.
To change the latter to sliding or display version,
• Remove the shelf from the cabinet,
• Remove the 2 rack support pins,
• Take the 2 runners supplied with the cabinet,
• Insert the 2 runners in the desired location, in the shelf support strips (see diagram 1 and 2),
• Then follow the installation stages provided in the previous paragraphs.
If you do not have enough bottles to fill your wine cabinet, it is preferable to spread the load over the
entire cabinet rather than placing bottles "all at the top" or "all at the bottom". For optimal performance,
we recommend that you use the cabinet at over 75% of its capacity.
11
(only available on the 2
Diagram 4

Commissioning and temperature setting

Commissioning
After waiting 48 hours, plug in your wine cabinet, having checked that your socket is correctly
supplied with power
(presence of correct sized fuses, circuit breaker in working order. If need be, plug in another electrical
appliance to check the power supply).
Humidity
Your cabinet is fitted with an exclusive ARTEVINO system allowing you to recreate inside your wine
cabinet the level of humidity required to effectively seal your bottles' corks. When installing your cabinet, it
is important to pour the equivalent of one glass of water onto the floor of the cabinet to reach an optimal
hygrometry rate.
Temperature setting
Description of the control panel
1
2
3
4
• Temperature display: displays the actual temperature inside your wine cabinet. It is therefore
necessary to wait before your new setting takes effect.
Status lights:
Compressor 1 : indicates that the compressor is operating. When this flashes, it means that the
compressor is going to start up in a few minutes (technical delay).
Defrosting cycle 2 + : indicates that an automatic defrosting cycle is underway.
Heater 3 : indicates that the heater is operating.
Alarm 4 : informs you that there is an abnormally high or low temperature inside the wine cabinet.
Commissioning the control panel
By default, the control is in the OFF position. To switch on the cabinet, press and hold the
several seconds until just the temperature is displayed.
To put the cabinet on standby, press and hold down the
between the internal temperature and the OFF display (the cabinet is no longer operating, only the display
is active).
To reactivate the cabinet back on, press and hold down the
temperature is displayed.
button for
button for several seconds. The display switches
button for several seconds until just the
GB
12