Connection (Only I-R Marki Ws/Wsrf/Transmit Ws) - Selve i-R Marki WS Manual De Instrucciones

GB Installation/Connection

Connection (only i-R Marki WS/WSRF/Transmit WS)

Safety instructions
• Risk of injury through an electric shock.
• Terminal connections must be carried out by an authorised electrician.
• Disconnect all connecting cables throughout the system before carrying
Warning!
out installation or maintenance.
• Ensure that the device cannot be accidentally switched on.
• A potential-free control output is not suitable for safety extra low
voltage (only i-R Marki WS/WSRF).
i-R Marki WS/WSRF
1. Loosen the wall mount.
2. Connect the power line and the motor to the i-R Marki WS/WSRF as follows:
C terminal is a potential-free contact (not suitable for safety extra low voltage).
Insert a jumper if a 230 V motor is to be controlled.
3. Place the sensor on the wall mount and fix it using the provided screw.
22