Start-Up Of The Heat Pump; Display Controller Operation - Astralpool ELYO SMART NN 06 Manual Del Usuario

7. Display Controller Operation

7.1. Guide for operation
When the heat pump connects to the power, the LED display shows a code for 3 seconds which indicates the heat
pump model.
7.2 The keys and their operations
7.2.1 button
Press to start the heat pump unit, the LED display shows the desired water temperature for 5 seconds,
then shows the inlet water temperature and the operation mode.
Press to stop the heat pump unit and show "OFF"
Notice : During the parameter checking and setting, press the
Press again to turn on/off the machine.
7.2.2 button
Press for 5 secondes to switch the heating mode and auto mode.
7.2.3 and
Clock/unclock the display:
Hold and
Water temperature setting:
Press or

7. Start-up of the Heat Pump

button
for 5 seconds to lock/Unlock the display.
to set the water temperature directly.
to quick-exit and save the current setting .
- 31 -