Plu (Price Look-Up) And Subdepartment Programming - Sharp XE-A213 Manual De Instrucciones

7

PLU (Price Look-Up) and Subdepartment Programming

The PLU function allows speedy key entries whereby a price is automatically called up when a direct PLU key is
pressed or a code is entered. The subdepartment is a kind of "open PLU", which requires you to enter a price
before the direct PLU key is pressed or after the PLU code is entered. A maximum of 1200 PLU/subdepartment
settings are possible. Each one belongs to a department and acquires the department's parameters (tax status,
sign, SICS and entry digit limit).
By default, PLU/subdepartment setting for 1 through 210 codes are available and they are assigned as positive
PLUs associated with department 1 and preset unit price "0".
To extend the number of PLUs/subdepartments, please refer to "EJ memory type" on page 73.
Direct PLU key programming (For PLU code 1 to 210)
Your machine provides 70 direct PLU keys (
provide three levels for each direct PLU key. For the function details, please refer to "PLU level shift (for direct
PLU key)" on page 38. PLU codes 1 though 70 are allocated for level 1, PLU codes 71 thought 140 for level 2
and PLU codes 141 through 210 for level 3. For example, for
PLU 141 for level 3 are assigned.
➝
\ ¡ /
thru
➝
[ ¡ /
thru
➝
] ¡ /
thru
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the department,
procedure except while entering texts or prices, the programming will move to the pressed key
programming.
1. Specify the direct PLU key and its level.
(1) Press a level shift key and a direct PLU key in this order.
Immediately after displaying the current text data
and the corresponding PLU key code you entered,
guidance message for the next step will be
displayed.
When you press a direct PLU key without pressing
a level shift key, level 1 is automatically selected.
22
¡
corresponds to PLU codes 1 through 70 respectively.
corresponds to PLU codes 71 through 140 respectively.
corresponds to PLU codes 141 through 210 respectively.
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
/
through ), and three PLU level shift keys (
¡
key, PLU1 for level 1, PLU 71 for level 2 and
A
is saved.
l
key twice is NOT saved.
- % V r o
, , , , ,
Key operation
s
key when the corresponding
X Y c b
, , or key in the middle of
Operator display
[ ¡
PLU.0071
ENTER[00]KEY
\ [ ]
) to
0071