Sharp XE-A213 Manual De Instrucciones página 61

(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the key to register the text.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Footer print on receipt programming (Press
(1) Go to (2) when the footer print on receipt does not
need to be changed from "NO". Otherwise, press
:
key to display "YES".
:
Each time key is pressed, the display shows
"YES" and "NO" alternatively.
Default setting is "NO".
This programming decides whether or not the
machine should print a message at the foot of a
receipt when a specified key is used. With regard
to programming method of footer logo message,
refer to "Logo messages" section on page 25.
s
(2) Press the key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Entry of amount tendered programming (Press
(1) Go to (2) when the entry of amount tendered does
not need to be changed from "NON
COMPULSORY". Otherwise, press
display "COMPULSORY".
:
Each time key is pressed, the display shows
"COMPULSORY" and "NON COMPULSORY"
alternatively. In case of
"INHIBIT" is displayed instead of "NON
COMPULSORY".
Default setting is "NON COMPULSORY" or "INHIBIT".
s
(2) Press the key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
@
and key moves the cursor to
:
key to
c b
and programming,
1 2 3
Part Part Part
CHEQUE
s A
to skip. / Press
s
to skip. / Press
FOR THE MANAGER
CHEQUE
s
FOOTER PRINT
to terminate.)
s
AMOUNT TENDERED
NON COMPULSORY
A
to terminate.)
s
LIMIT DIGITS
NO
8
59