Intended Use; Approvals And Certifications - Honeywell RABO Manual De Instrucciones

Honeywell

1.1 Intended use

CAUTION!
Responsibility for the use of the meter in terms of suitability,
intended use and the corrosion resistance of the materials to the
medium is solely in the hands of the operator.
INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.

1.2 Approvals and certifications

CE marking / EU declaration of conformity
The manufacturer certifies conformity with the EU
declaration of conformity and by attaching the CE marking.
The
requirements of the relevant EU Directives.
Comprehensive
Directives
certifications, is contained in the EU declaration of
conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
ATEX/IECEx
DANGER!
The rotary gas meter is suitable for use in Zone 1 hazardous
areas and is approved with the following certification (IECEx)
and manufacturer's declaration (ATEX):
IECEx TUR 16.0042X (IECEx)
557/Ex-Ab 2664/16
10
measuring
information
and
See chapter 5.3 Approvals and Annex A –
Standards and Norms, for details of other
approvals and Directives.
II 2G Ex h IIC T4 Gb
730xxxxxe
instrument meets
on
Standards, as
TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
(ATEX)
TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
© Elster GmbH | All rights reserved. Subject to modification
the statutory
the applicable
well as recognized
EU