Introduction / Unpacking; Unpacking Instructions - ILCO Unican Performance Serie Manual De Instrucciones

INTRODUCTION / UNPACKING

You've purchased a superior key cutting machine.
The Model 045 manual Performance Series key machine
you've just purchased incorporates the latest improve-
ments in design for key duplicating machines of its type.
This machine features exclusive four-way vise jaws
designed to accommodate virtually any standard cylinder
key without the need for adapters.
Your 045 key machine has been shipped to you in a stur-
dy, specially cushioned container to prevent the possibil-
ity of damage during handling and shipment. Once the
machine is removed from the carton, it should be set up
on a level workbench and wiped free of all rustproofing
The 045 has been engineered to duplicate cylinder (para-
centric) keys. It is not intended or designed for any other
purpose. The machine operator assumes all liability when
using this machine in a manner inconsistent with its stat-
ed design purpose. Refer to page 3 for complete safety
information before operating the machine.
ILCO UNICAN strongly recommends the use of pro-
tective eye glasses or goggles when operating this ma-
CAUTION! DO NOT DESTROY OR DISCARD THIS SPECIAL SHIPPING CARTON.
STORE IT CAREFULLY IN A SAFE PLACE. THIS CARTON SHOULD BE USED
WHENEVER THE MACHINE IS MOVED OR SHIPPED.
4
Congratulations!
Even double-sided automotive keys can be duplicated
with ease; the four-way jaws include stations ideally suit-
ed to gripping these keys and is capable of gripping them
in the groove or milling for enhanced clamping perfor-
mance when necessary.
Accurate, easy to operate and maintain, the model 045
delivers excellent performance at an economical price!

Unpacking instructions

oil. The machine is adjusted at the factory and test keys
have been cut on it, but it is recommended that you
check the adjustments to make sure they have not
slipped or shifted during transit (see page 13 "Adjusting
for depth of cut").
Safety
chine, or when in the vicinity of the machine while it is
being operated. Protective eye wear prevents injuries!
The machine should be turned off before loading or un-
loading keys.
When the key machine is operating, be careful not to
contact the vise jaw or carriage against the cutting wheel
as this will cause damage to the cutter, jaw, or carriage.