Operating Mode / Status Description - Phasak PH 9273 Manual De Uso

3. Operations
EN

3.8. Operating Mode / Status Description

Following table shows LCD display for operating modes and status.
(1) If the UPS is in normal operation, it will show seven screens one by one, which represents 3 phase input voltages (An, bn, Cn),
3 line input voltages (Ab, bC, CA) and frequency in turns.
(2) If parallel UPS systems are successfully set up, it will show one more screen with "PAR" in parameter 2 and assigned number
in parameter 3 as below parallel screen diagram. The master UPS will be default assigned as "001" and slave UPSs will be
assigned as either "002" or "003". The assigned numbers may be changed dynamically in the operation;
82
PH 9273 | PH 9293
Uninterruptable Power Supply
Segurança e harmonia
ININTERRUPTA