Skil ME981901 Manual Del Propietário página 16

Option 2
Press the Main Button to turn on the tool. Press and hold the UP
Arrow Button for 2 seconds until the desired unit of measurement
among the choices listed below is displayed on the screen.
Unit and
precision
NOTE: Faulty measurements cannot be excluded when measuring
to different surfaces.
Among the problematic surfaces are:
Transparent surfaces (e.g., glass, water)
•
Reflective surfaces (e.g., polished metal, glass)
•
Porous surface (e.g., insulation materials)
•
Structured surfaces (e.g., roughcast, natural stone)
•
If required, use a laser target plate (not included) on these surfaces.
Furthermore, faulty measurements are also possible when sighting
inclined target surfaces.
Air layers with varying temperatures or indirectly received reflections
can affect the measured value.
NOTE:
When error messages occur in the LCD display, press any
button to go back to the initial measurement display.
NOTE: When entering into the modes involve of distance
measuring, the distance measurement will be taken from the
Distance Reference Base of the tool.
16
Distance
0.000 m
0' 00" 1/16
1/16
0"
0.000"
Area
0.000 m 2
0.000 ft 2
2
0.000 ft
2
0.000 ft