Maintaining Your Kinetico Signature Series Water Softener; Changing The Filter; Adding Regenerate - Kinetico Water Systems SIGNATURE SERIE Manual Del Usuario

Maintaining Your Water System
Your Signature water softener is engineered to provide you with quality water
without requiring extensive maintenance. However, some routine maintenance is
necessary to keep your system working properly.

Changing the Filter

Your Signature water softener may have been installed with an in-line filter to
remove solid material from the inlet water supply. Periodically, the filter cartridge
will require replacement. This should occur when the water pressure in the home
begins to gradually decrease.
)
Adding Regenerate (water softener salt or potassium chloride
Make sure your salt storage tank never runs out of regenerant. Refill regenerant
anytime before water is visible in the brine drum or softener cabinet (on cabinet
models). Use Kinetico Water Softener Salt, available from most Kinetico dealers,
or another high quality brand. Some salts contain foreign particles which can
cause problems with your system, so be sure to use a high quality grade of salt,
processed especially for use in water softeners. If you choose to use potassium
chloride, contact your local authorized Kinetico dealer to find out about the
recommended adjustments to your system. Your Kinetico dealer can also
recommend or perform a schedule of periodic maintenance. DO NOT USE
ROCK SALT OR SOLAR SALT, as it often contains significant levels of dirt or
foreign matter.
4