Tabla de contenido
Publicidad
7. Proceso de escaneo
10. Descripción del producto
Zfx
All data specifi ed in this data sheet apply to single image captures only.
The measurement specifi cations given are average values for the central measuring range achieved under defi ned
surface and the scanning conditions.
Zfx GmbH |
66
™
Evolution
Calibration Plate
Material
Dimensions
mm
Colour
Structuring
Structure accuracy
μm
Temperature operating range
°C
Please note:
measurement conditions and after precise calibration of the sensor. They solely apply in combination with the system
confi guration provided by Zfx. Furthermore, all accuracy and resolution details depend on the object
All values stated in this data sheet are approximated values within set tolerances, indicating the range of values.
1
For example, the fi eld of view `135' may have an image diagonal which may vary by ± 1%.
Field of view size in relation to the operating distance.
2
Maximum distance in z-direction.
3
The values for lateral resolution are calculated theoretically
4
(ratio of the fi eld of view and pixel number of camera chip used).
5
The resolution limit is defi ned as the theoretically achievable accuracy
(ratio of fi eld of view to number of pixels of the camera chip).
The noise value is measured as deviation of the measured points against a best-fi t curve.
6
The noise of the measured 3D-data highly depends on the noise of the camera chip.
Characteristic feature accuracy of the type series. The determination of the characteristic
7
feature accuracy is based on VDI Guideline 2634.
Kopernikusstraße 27 | 85221 Dachau | Deutschland | Tel. +49 (0) 8131 / 33 244 - 0 | Fax +49 (0) 8131 / 33 244 - 10 | www.zfx-dental.com
Precision glass ceramic
120 x 80 x 1.8 (with rounded areas R = 60 mm)
White, opaque, matt fi nished
Dark chrome raster with calibration markers
± 3
18 – 25
3
Publicidad
Tabla de contenido
