Using The Memory; Storing A Reading; Recalling From Memory; Clearing The Memory - OHAUS STARTER 3100M Manual De Instrucciones

STARTER 3100M Bench Meter
5

Using the memory

5.1

Storing a reading

The STARTER 3100M can store up to 99 pH endpoint results and another 99 conductivity endpoint
results.
 Press button
has been stored.
If you press
further data you will have to clear the memory. (See 4.4.3)
5.2

Recalling from memory

 Press and hold
measurement reaches endpoint.
 Press button
which result is being displayed.
Press

5.3

Clearing the memory

 Press
 Press
There are now 2 options:
 Press
 Press
6

Printing

If the printer is connected to the STARTER 3100M (e.g. SF-F40A) green light means connection
success.
Printer baud rate 9600bps; 8 data bit; none parity bit; 1 stop bit,
A print-out is automatically generated after each end pointed measurement or calibration.
when the measurement reaches endpoint. M01 indicates that one result
when M99 is displayed, FUL displays to indicate the memory is full. To store
to recall the stored values from memory when the current
or to scroll through the stored results. R01 to R99 indicates
to exit.
or to scroll through the stored results until "
, CLr blinks;
to confirm the deletion of all the stored data.
to return to the measurement mode without deleting the memory.
EN-17
" appears.
CL
MR