EN-26
Examples of temperature coefficients (α-value)
9.3
Substance at 25 ° C
HCl
KCl
CH3COOH
NaCl
H2SO4
HF
α-coefficients of conductivity standards for a calculation to a reference temperature of 25° C
Standard
Measurement
temp.: 15° C
84 μS/cm
1.95
1413 μS/cm
1.94
12.88 mS/cm
1.90
9.4
Conductivity to TDS conversion factors
Conductivity
At 25 ° C
84 μS
447 μS
1413 μS
1500 μS
8974 μS
12.88 μS
15 μS
80 mS
Ohaus products are warranted against defects in materials and workmanship from the date of
delivery through the duration of the warranty period. During the warranty period Ohaus will repair,
or, at its option, replace any component(s) that proves to be defective at no charge, provided that
the product is returned, freight prepaid, to Ohaus.
This warranty does not apply if the product has been damaged by accident or misuse, exposed to
radioactive or corrosive materials, has foreign material penetrating to the inside of the product, or
as a result of service or modification by other than Ohaus. In lieu of a properly returned warranty
registration card, the warranty period shall begin on the date of shipment to the authorized dealer.
No other express or implied warranty is given by Ohaus Corporation. Ohaus Corporation shall not
be liable for any consequential damages.
As warranty legislation differs from state to state and country to country, please contact Ohaus or
your local Ohaus dealer for further details.
Concentration [%]
10
10
10
10
10
1.5
Measurement
temp.: 20° C
1.95
1.94
1.89
TDS KCl
ppm value
40.38
225.6
744.7
757.1
5101
7447
8759
52.168
LIMITED WARRANTY
STARTER 3100M Bench Meter
Temperature coefficient α [%/° C]
1.56
1.88
1.69
2.14
1.28
7.20
Measurement
temp.: 30° C
1.95
1.94
1.91
Factor
ppm value
0.5048
0.5047
0.527
0.5047
0.5685
0.5782
0.5839
0.6521
Measurement
temp.: 35° C
2.01
1.99
1.95
TDS NaCl
38.04
215.5
702.1
737.1
4487
7230
8532
48.384
Factor
0.4755
0.4822
0.4969
0.4914
0.5000
0.5613
0.5688
0.6048