Oil Alarm System; Important; Stopping The Engine; Engine Switch - GENERGY RENT Serie Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6.3 Oil alarm system.

The oil alarm system is designed to avoid engine damaged caused by an
insufficient amount of oil in the sump. Before the oil level in the engine sump is
below the safety limit, the oil alert system will shut the engine down
automatically.
NOTE: Protection due to lack of oil must be considered extreme safety. It is
the sole responsibility of the user to check the oil level before each use as
indicated in the manual. It is unlikely for this safety to fail, but if it does, damage
in the image would be very significant. The client would be solely responsible
for lack of maintenance and repair would be excluded from the warranty.
Remember that it is a safety alarm in case of critical level, it is not a low oil level
indicator.
IMPORTANT: The alert system only acts in case of a level failure, it cannot
protect in case of inadequate oil or if it is in poor condition.

7. Stopping the engine

To stop the engine in case of an emergency, turn the engine switch off by
pressing to the "OFF" position.
Normal engine shutdown:
1 Unplug the electrical devices plugged to the generator.
2 Place the engine's switch to the "OFF" position
3 Turn the fuel valve to the Left, "OFF" position.

ENGINE SWITCH

Electrical startup models
Manual startup models
23

FUEL VALVE

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido