GENERGY RENT Serie Instrucciones De Uso página 67

1 Loosen and remove the A wing nut
2 Lift the filter cover
3 Loosen and remove the B wing nut
4 Remove the filtering cartridge
5 Separate the sponge from the
paper filter.
6 Only clean the sponge pre-filter in
a soap and water solution. Allow it
to dry completely.
7 Dip the dry sponge pre-filter in oil,
the same type
generator engine.
8 Drain by pressing the sponge pre-
filter with your hand.
9 Now shake the paper filter against
a hard surface, you can also clean
it with an air compressor (maximum
2 BAR).
10 Once the paper filter is clean, mount the sponge pre-filter on the paper filter
and assemble the complete and clean filter on the machine by following the
same steps used for disassembly.
used in the
27
A WING NUT
COVER
B WING NUT
SPONGE
PAPER FILTER