Ignition Switch - GENERGY ROBUSTA Serie Instrucciones De Uso

3 Press the engine's ignition switch to "ON" and then to "START", release once
the engine has started.
NOTE: IF the engine does not start up within 3 or 4 seconds, release the
ignition switch and wait for a few seconds before trying again to avoid overheating
the ignition switch.

IGNITION SWITCH

4 Once started, wait for a few seconds and introduce the choke completely (open
air position). The engine will begin working stably and is ready to have equipments
plugged in.
.
NOTE: Do not leave the choke in an intermediate position, the blend would
be too rich and the engine would not work properly.
During the first commissioning of the machine the battery's charge may be low if
stored for too long. If the charge is not sufficient, start up the equipment manually
(go to point 5.1). The battery is recharged automatically while the generator is
running.
CHOKE
13