Use Of The 230V De Ac Outlet - GENERGY ROBUSTA Serie Instrucciones De Uso

6.1 Use of the 230V de AC outlet.

NOTE: Check that no devices are plugged into the generator; unplug
everything before starting the engine.
Start the engine following the steps indicated in this manual.
Once started, verify that the thermal protection (BREAKER) is in the "ON" position
as per the drawings, now you can connect your devices.
• Graphic for 230V single phase generators:
• Graphic for 230/400V 3-phase generators:
THERMAL PROTECTOR 230 OUTLET
THERMAL PROTECTOR 400V OUTLET
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output.
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.
230V 16AH BASE THERMAL PROTECTOR
230V 32AH BASE
230V 16AH BASE
18
400W 16AH BASE