Rheem RXAC Manual De Uso página 34

changes by 1 hour.
Pressing the "TIMER" button again activates the on timer.
3.
4. You can activate other functions to regulate the air conditioning when the
timer is activated (mode, temperature, oscillations of the fins, fan speed
etc.). The remote control display shows all the settings and saves them.
When the timer reaches the set time, the air conditioner starts to operate
according to the settings in place.
"SILENCE" button
11.
The silence function can be turned on or off by pressing this button (the "SILENCE"
symbol will appear/disappear). This function allows you to select an ultra-quiet
speed.
After changing the batteries, this function will turn off automatically.
"TURBO" button
12.

Pressing this button will turn the "TURBO" function on or off (the "TURBO"
symbol will appear or disappear) in either cooling (COOL) mode or heating
(HEAT) mode.

This function forces the unit to run at full capacity, giving priority to reaching
the setpoint quickly rather than ensuring efficient operation.

After changing the batteries, this function will turn off automatically.

This function cannot be set during automatic operation (AUTO), in
dehumidification mode (DRY) or in fan mode (FAN). In these cases,
therefore, the "TURBO" symbol will not appear on the LCD.
"DISPLAY" button
13.
In display mode, press button once, switch off "DISPLAY". Press "DISPLAY"
again.
LCD will show ambient & setting temperature after flashing 5s. It's convenient
for
users to check ambient or setting temperature at any time in darkness
"iCLEAN" button
14.

With the remote control "OFF", press the "iCLEAN" (self-cleaning) button.
The fins that guide the flow of air go back to their initial position in cooling
mode and the unit activates the "iCLEAN" function for a maximum of 35
minutes. The aim of this function is to remove the dust from the evaporator
and dry the water contained in it, so as to prevent the formation of mould
and consequent bad smells.

After activating the "iCLEAN" function, pressing the "iCLEAN" or "ON/OFF"
buttons cancels the function and reactivates the air conditioning.

If you do not perform any operation, the self-cleaning function remains
active for a maximum of 35 minutes.
NOTE: The "iCLEAN" function can be activated simultaneously with the on
timer. In this case, the on timer starts after the end of the "iCLEAN" function.