Rheem RXAC Manual De Uso página 37

3. Replace the cover.
AUTOMATIC OPERATION MODE
When the "ON/OFF" button is pressed, the air conditioner starts running.
1.
Press the "MODE" button and select automatic mode.
2.
3. Press the SPEED button to adjust the fan speed. You can select LOW,
MID, HIGH and AUTO speeds.
4. If you press the button again, the air conditioner stops.
COOLING AND HEATING OPERATION MODES
When the "ON/OFF" button is pressed, the air conditioner starts running.
1.
Press the "MODE" button and select cooling or heating mode.
2.
Press the "
3.
increases or decreases the temperature by 0.5°C in a range from 16 to 32
°C.
4. Press the SPEED button to adjust the fan speed. You can select LOW,
MID, HIGH and AUTO speeds.
5. If you press the button again, the air conditioner stops.
DRYING OPERATION MODE
When the "ON/OFF" button is pressed, the air conditioner starts running.
1.
Press the "MODE" button and select dehumidification (DRY) mode.
2.
Press the "
3.
increases or decreases the temperature by 0.5 °C in a range from 16 to
32 °C.
4. Press the SPEED button to adjust the fan speed. You can select LOW,
MID, HIGH and AUTO speeds.
5. If you press the button again, the air conditioner stops.
TIMER BUTTON MODE
1. Clock Function
Clock setting during using period, the method just like below:
1) Open the lid of the remote controller, then press Timer button, the
clock function is actived.
Press the "
2)
hour system with a.m.& p.m.
3) Press the TIMER button again to confirm the clock time
2. Timing ON Function
Timer ON function must be set when the airconditioner is off.
The method just like below:
1) Open the lid of the remote controller, then press TIMER button, the
letter "ON" will be displayed and flicker.
Press the "
2)
hour system with a.m.& p.m.
" and " " buttons to adjust the temperature. Each press
" and " " buttons to adjust the temperature. Each press
" and " " button to set clock time. The time is 12-
" and " " button to set clock time. The time is 12-