Pekatherm UP105 Instrucciones De Uso página 12

INSTRUCTIONS
OpERaTINg INSTRUCTIONS
1) Plug the product into the mains socket, making sure your mains' specifications corres-
pond to those of the product stated on the label. For products with detachable control unit,
first connect the power cord to the product and then to the mains socket.
For detachable products, use only the control unit originally provided with the product.
2) Take the control unit and slide the switch to the desired temperature setting. Immediately
the light turns on. Since then, the product works normally regulating temperature at the
selected level. Wait a few minutes, until you feel a pleasant warmth.
3) To turn off the product, move the slide switch back to the off position. The light will then
be turned off. When not using the product for a long time, please unplug it from the mains.
4) Unplug the product and let it cool down before folding it for storage.
aDVICE ON TEmpERaTURE SElECTION
Excessive heat continuously applied to the skin may produce skin burns. The maximum tem-
peratures our products can ever reach are those permitted by the current regulations.
The heating underblankets reach temperatures between 45ºC and 55ºC.
(Note: all measures were collected in laboratory conditions with products totally covered,
according to procedures described in the EN60335-2-17 Standard).
It usually takes 45 to 60 minutes for the product to reach the maximum temperature.
You can set the control unit at the maximum level to obtain a faster warm up. Remember,
however, that you should not use this setting continuously for more than one hour. After that
time, we recommend that you lower the temperature gradually.
For overnight or continuous use we recommend setting the unit at its lowest level (level 1).
Benefits provided by these products have little to do with high temperatures and are based
on a consistent, controlled low-level heat.
TECHNOlOgY
This product family is specially designed to ensure a smooth low-level heat which, apart
from comfort, provides recognised pain relieving effects, since it dilates the blood vessels and
enables muscular distension.
The control unit was designed and developed together with the heating elements to assure
the best performance.
12