Elster RABO Manual De Instrucciones página 13

DN
32 PN 10/16
DN
CLASS 150
32 PN 10/16
40 PN 10/16
CLASS 150
CLASS 150
40 PN 10/16
50 PN 10/16
CLASS 150
CLASS 150
50 PN 10/16
80 PN 10/16
CLASS 150
CLASS 150
80 PN 10/16
100 PN 10/16
CLASS 150
CLASS 150
100 PN 10/16
150
CLASS 150
Then install the meter,
– gas-tight,
Then install the meter, Then install the meter,
– with the supplied accessories,
– only in flow direction (as marked by an arrow on the meter housing or index
- – gas-tight, gas-tight,
head S1D),
- – with the supplied accessories, with the supplied accessories,
– only unstressed,
- – only in flow direction (as marked by an arrow on the meter housing or index only in flow direction (as marked by an arrow on the meter housing or index
– the piston axes must be horizontal, check using a spirit level.
head S1D),
head S1D),
– when fitting the seals and gaskets, ensure that they are aligned
– only unstressed, only unstressed,
-
concentrically and do not project into the flow channel,
– the piston axes must be horizontal, check using a spirit level. the piston axes must be horizontal, check using a spirit level.
-
– weatherproof.
– when fitting the seals and gaskets, ensure that they are aligned
- when fitting the seals and gaskets, ensure that they are aligned concentrically
concentrically and do not project into the flow channel,
and do not project into the flow channel,
If you have specified the installation or operating position when ordering, all
- – weatherproof. weatherproof.
attachments will have been fitted in accordance with the installation position
ex-works.
If you have specified the installation or operating position when ordering, all attachments If you have specified the installation or operating position when ordering, all
If you wish to install the unit vertically at a later point, you must turn the
will have been fitted in accordance with the installation position ex-works. attachments will have been fitted in accordance with the installation position
index head and other attachments, e.g. volume corrector, through 90°.
If you wish to install the unit vertically at a later point, you must turn the index head ex-works.
We recommend that you contact our Elster-Instromet Customer Service
and other attachments, e.g. volume corrector, through 90°. If you wish to install the unit vertically at a later point, you must turn the
(Tel. +49 / (0)6134-605-0 / -346) for such conversion work.
We recommend that you contact our Elster-Instromet Customer Service index head and other attachments, e.g. volume corrector, through 90°.
(Tel. +49 / (0)6134-605-0 / -346) for such conversion work. We recommend that you contact our Elster-Instromet Customer Service
(Tel. +49 / (0)6134-605-0 / -346) for such conversion work.
73021678a © Elster GmbH · All rights reserved · Subject to technical modification
73021678d © Elster GmbH • All rights reserved • Subject to technical modification
Screw size Screws per meter
M16
Screw size Screws per meter
M12
M16
M16
M12
M12
M16
M16
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20 M16
M16
M20
Elster-Instromet
Elster-Instromet
Elster-Instromet
Rec. tightening
torque Nm
torque Nm (Dry)
8
torque Nm
8
8
8
8
8
8
8
8
8
8
16
8
8
16
16
8
16
16
16
50
35
50
60
35
40
60
60
40
50
60
55
50
85
55
60
85
60
60
85
60
100
9
11