Webasto Frigo Top 10 I-ES Instrucciones De Uso página 4

LED
On Flashing
SE
Tbl. 03: Display activities
* Anti-short cycle is the minimum interval between the compres-
sor stop and the following restart. It prevents overheating.
3.4 Switch on the refrigeration system
Start the vehicle engine
3
– The refrigeration system is switched off.
– The display shows „Off"
X
Press "On/Off" button
3.5 Switch off the refrigeration system
During a short vehicle stoppage, e.g. during loading peri-
ods, you do not need to switch the system off using the
control element. The system will start up automatically
the next time you start the engine.
If not used for a longer period, then switch off the refrig-
eration system via the control element.
X Press "On/Off" button
Do not switch off the system during the de-
frost process.
3.6 View cooling compartment set-point
X Press the "Set" button and release immedi-
SET
ately.
Frigo Top | Pordoi | Rolle
Meaning
Drainage time after defrosting
Fan active
Fan switch-on delayed
Malfunction on system
Continuous working cycle in op-
eration
Display of compressor operating
hours.
■ If always ON then service is
necessary.
Service is necessary in less than
100 operating hours
Changing set-point
Service indicator, see § 3.13
Press „Set" again or the current value measured in the
cooling compartment is shown after 5 seconds.
3.7 Set the cooling compartment tempe-
rature
X Press the "Set" button and hold for 2
SET
seconds.
– The current set-point is displayed
–
X Press "Up" and "Down" button to set
the cooling compartment set-point
X To save the cooling compartment set-
SET
point press the "Set" button or wait for
at least 15 seconds.
The display with the temperature set-point flashes for
several seconds. The value measured in the cooling com-
partment is then shown.
3.8 Lock and unlock buttons
The keypad of the control element can be locked.
Lock
X Press the "up" and "Down" button and
hold for several seconds
– The display shows "PoF" flashing for
several seconds.
Now it is only possible to display the current cooling
compartment temperature and the set target tempera-
ture.
Unlock
X Press the "up" and "Down" button and
hold for several seconds
– The display shows "Pon" flashing for
several seconds.
3.9 Regulate the load compartment tem-
perature (optional)
Regulation of the load compartment temperature makes
it possible to maintain the temperature target value in
the cooling compartment when external temperatures
are low by automatically activating the heating and cool-
ing functions. The control element automatically selects
the correct operating mode, making it possible to trans-
port goods for which excessive cooling during cold
weather must be avoided at all costs. The control ele-
ment controls the necessary functions automatically.
LED flashes
4