Indel B TB 30 AM DRAWER Instrucciones De Uso página 33

TB 30 AM DRAWER
ENGLISH
Warning!
Do not touch the compressor or the con-denser. They are hot.
Warning!
• The cooler is suitable for cooling and freezing foods.
• Use the travel box exclusively for cooling and storing closed beverages and snacks.
• Do not store any perishable food in the travel box.
• Food may only be stored in its original packaging or in suitable containers.
• The travel box is not intended to be brought into contact with food.
• The travel box is not intended for the proper storage of medicines. See the instructions in the
package leaflet for the medicinal product.
Warning!
The only purpose and function of the product when used as a freezer is to maintain already
frozen food completely frozen.
The refrigerator will not freeze non-frozen or partially frozen food products. If a non-frozen or
partially frozen food product is stored in the freezer, this is considered improper use and can
cause possible unintended thawing of food which may lead to problems related to safety, illness
or injury if swallowed.
The preservation of non-frozen or partially frozen food in the freezer can also affect the quality of
other frozen food products stored in the freezer.
Exposure to temperatures above the temperature of the climatic class range for which the freezer
was built, power supply interruptions and/or frequent opening of the freezer can influence the
effectiveness of the refrigerator and the quality of the contents of the freezer.
The user should always check food quality before ingesting.
INSTALLATION
TB 30 AM DRAWER refrigerators have been designed and constructed exclusively for recessed
installation and installation that is in compliance with standard dimensions. The refrigerator
must always be in a horizontal position, with the compressor's rubber feet at the bottom. The
compressor is capable of functioning at angles of up to 30°. The compressor can become
damaged with any higher inclinations. Also remote operation compressors must be installed with
its rubber feet downward.
The product should be secured to the lodgings using the Easy Fix fastening system, which are
special pre-drilled fastening points inside the trunk for easy, effective installation that is not visible
from the outside (Fig. 3).
Drill the fastening point with a drill or sharp tool (Fig 4 A, only requires light pressure as it is a
pre-drilled area). Screw in and fasten the trunk from inside with M4x16 screws (Fig. 4 B) and take
care to re-insert the cover complete with insulation foam to ensure continued correct product
TB30AM DRAWER_20-06-2018 33