Temperature Setting And Controls; Disposal Of Used Materials - Costan MAMBO NEXT Serie Instrucciones De Uso

10. TEMPERATURE SETTING AND CONTROLS

Each refrigerating appliance is provided with an electronic control for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decrement the temperature:
• Press the (Set) (2 sec.) key in order to see on display the temperature set point.
• Press the () key or the () key in order to increment or decrement the temperature set point.
• Press the (Set ) key in order to store the new temperature set point.
LED MODE
ON
Flashing
ON
Flashing
ON
Flashing
ON
ON
11.

DISPOSAL OF USED MATERIALS

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this
service. Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of household appliances sepa-
rately, the product is marked with a crossed-out wheeled dustbin.
The symbol on the product or on the packaging indicates the product must not be considered normal domestic
waste, but must be brought to an appropriate collection point for recycling of the electrical and electronic
equipment.
By disposing of this product appropriately, you contribute to avoiding potential negative consequences, which
could derive from inadequate disposal of the product.
For more detailed information on recycling of this product, contact the municipality office, the local waste
disposal service or the shop where you purchased the product.
1
2
3
Meaning
Active compressor
Delay against close starts
Defrosting in progress
Dripping in progress
Fans on
Fans start delay in progress
A temperature alarm activated
Continuous cycle in progress
1. Light switch
2. Automatic defrosting button
3. Button to show set temperature
4. Button to decrease temperature
5. Button to increase temperature
LED MODE
°C
Flashing
ECO
Meaning
ON Energy saving in progress
ON Light on
ON Auxiliary active
ON Unit of measurement
Programming
ON Energy saving in corso
4
5
-37-