Publicidad
Idiomas disponibles
Idiomas disponibles
Checking the Focus by Enlarging a Selected Picture
(Displaying Close-ups)
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Select the image you
want to display with the arrow pad, then pull the zoom lever toward T
(telephoto). The selected image enlarges 1.5x and will continue to
enlarge 0.5x (up to 3x) each time you pull the zoom lever to T. Press the
arrow pad in one of the four directions to select the area you want to
enlarge. Push the zoom lever toward W to return the image to its
original size.
Connecting to a TV Set
To Avoid Accidentally Erasing Pictures You Want to Keep
(Image Protection)
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Use the arrow pad to
select the image you want to protect, then press the protect button. To
cancel image protection, press the protect button again.
One-Frame Erase
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Use the arrow pad to
select the image you want to erase, then press the erase button. When
the confirmation screen appears, select "Yes" on the arrow pad, then
press the OK button. The camera beeps once and erases the picture.
First make sure the camera and
television power are off and the
camera lens barrier is closed.
Connect one end of the video
cable into the camera's video
output connector and the other
into the TV's input terminal. Turn
on the TV, set it to "video output,"
then press the camera's monitor
button. Select the image you want
to display using the arrow pad.
13
Publicidad
