Descargar Imprimir esta página

Xylem Si Analytics ViscoClock Manual De Instrucciones página 25

Aparato de medicón de la viscosidad

Publicidad

Idiomas disponibles

Idiomas disponibles

Observe the safety data sheets of the manufacturers!
• When handling solvents please observe the pertinent memorandums of the employer's liability insurance
associations (VBG 1 and VBG 113).
• When using alkaline Iaboratory cleaners there is a danger to health (caustification, darnage to skin and
eyes)!
Please observe the memorandums of the employer's liabillty insurance associations and the safety data
sheets of the manufacturers.
• When using tampering liquids with a temperature above 50 °c there is a danger of getting burnt when
touching the thermostat bath cover!
• Please observe the standard regulations and Standards for capillary-viscosity measurements.
• You can obtain a list of the national and international standards from SI Analytics GmbH.
2
Unpacking the Viscosity Measuring Unit ViscoClock
• Check packing tor damage. In case of damage contact your supplier.
• Remove the Viscosity Measuring Unit ViscoClock and the TZ 1858 universal voltage power supply from
the packing.
Scope of delivery: Software CD VZ 6555
Universal voltage power supply TZ 1858
Primary adapter for Europe
Primary adapter for USA
Manual pump 'press' VZ 6550
NOTE: The scope of delivery does not include viscometers.
• Place the Viscosity Measuring Unit ViscoClock in a dry environment on a plane surface. Ambient tem-
perature: + 10 °c ... + 40 °c (→ chapter 1.2, technical data).
Owing to the small stand foot and the relatively high center of gravity we recommend storing the Viscosity
Measuring Unit ViscoClock always in a horizontal position outside of the bath.
Properties and range of use
23

Publicidad

loading