Operation - ECOFOREST HIDROCOPPER Manual De Usuario

1.

OPERATION.

Connect the cable to the plug located on the back right side of the boiler.
Please wait
******--******
2-8 Model
HIDROCOPPER
ECOFOREST
22:10 Friday
If this screen (on the left) does not appear, check what is displayed.

Menu.

On-Off.

Fuel decrease.

Fuel increase.

Liquid glass display.

Infrared receptor.

1.1. DISPLAY :
The screen informs above the status of the boiler and displays the actions made on the keyboard. It displays
the level of fuel combustion, temperature (as long as the temperature sensor is connected), connection or
disconnection of the endless motor, hour, date, connection or disconnection of the chronothermostat,
thermostat, stand-by, automatic air, manual air and fuel drop.


1.2. ON/OFF ( ) :
This is to turn the boiler on and off and exit from settings of the different menus.


1.3. MENU ( ) :
This button allows to select a function of the boiler, hour, minutes, day, temperature, on and off
programmes.


1.4. DECREASE ( )
This reduces the temperature (fuel drop) of the boiler.


1.5. INCREASE ( )
This increases the temperature (fuel drop) of the boiler.
1.6 INFRARED RECEPTOR
Receives the signal sent by the remote control by blinking.
1.7. KEYBOARD BACKLIGHT (ON/OFF):
The keyboard models Uni_Teclado_11 have a function that allows you to deactivate the keyboard backlight if
needed.
To activate this function, you must be in the main screen and push at the same time the increase and
decrease keys. ( 
At this time, the blue diode will blink once indicating that this function has been activated. After twenty
second of inactivity on the keyboard or remote control, the display light will turn off and only becomes
activate when you press a key on the control panel (keyboard) or remote control
This indicates that you must wait to see a graphic sequence on the bottom
which shows a complete system's checking is ongoing.
As indicated in the display, you must indicate the stove or boiler model you
have. In the case of the Insert model, you will see Insert Hidrocopper and so
on, Vigo, Venus, etc.
Once this checking done, the day and time are displayed. If the data is
20 °C
incorrect, see point 8 of MENU 1 to change it.
1
DETAILS OF THE CONTROL PANEL.
:
:

:
).
Drawing 1
15