ECOFOREST HIDROCOPPER Manual De Usuario página 20

1-2 0 8 : 3 0
ON Monday
1-2 Program 1
OFF Monday
1-2 – – : – –
OFF Monday
1-2 2 3 : 0 0
OFF Monday
1-2 1 1 : 0 0
OFF Monday
1-2 1 1 : 1 5
OFF Monday
1-2 1 1 : 1 5
OFF Monday
1-2 1 1 : 1 5
OFF Monday
1-2 Program 1
ON Tuesday
1-2 Program 1
Start-up/Stop
1-4 Temp / timer
programming
1-4a Timer
Mode
1-4a Timer
Mode
In order to get the same setting for every day, use the ON Week programme. That is, the boiler will turn on
and off everyday at the same time and no daily setting has to be done.
In order to make a multiple days setting, go through the same process but indicate the desired day instead of
"Monday".
In order to make two settings the same day, reach menu 1-3 Programme 2 on / off and follow the same
steps.
The chronothermostat function allows to ENABLE OR DISABLE the settings; for example, at spring, if you do
not wish to operate the programmed settings, just disable the Chrono mode by setting it at "NO".
21 °C



– –

21 °C

21 °C

21 °C
21 °C 
21 °C 




NO

YES
(1)
Depending on the desired temperature. Then, press
MENU. (ONLY IF OPERATING WITH THERMOSTAT OR
STAND-BY).
Press the fuel decrease button until you reach the
desired hour, in our case 11:
Press the fuel increase button until you reach the desired
minutes, in our case 15:
(1)
In this chapter, set the desired stop temperature.
(ONLY IF OPERATING WITH STAND-BY).
Press the fuel increase button until you reach:
To exit Menu 1 and get back to the main screen, press
the on-off button or do not press any button and you
automatically get back to main menu.
19