2
Touch the screen once.
The following screen appears:
This completes startup. For details about
operations, refer to the User's Guide.
Shutting Down
The system must be shut down through the
administration screen.
Note
Access the administration screen with the administrator
password or the sales clerk password. The default
passwords are as follows:
• Administrator: 7669
• Sales clerk: 0000
For details about passwords, refer to the User's Guide.
1
Touch the start screen twice in the upper left corner,
as shown below.
Notes
• If the system is set to use a screensaver, touch the
screen once to stop the screensaver, and then
perform step 1.
• To display the start screen from any other screen,
press the [Start Over] button.
2
Touch the number buttons to enter the administrator
or sales clerk password.
To correct your entry, clear it by touching the
[Clear] button, and then reenter the password.
3
Touch the [Enter] button.
Depending on the password you entered, the
following screen appears:
Administrator
7
Shutting Down