Fast Start Quick Reference Guide; Spraying Instructions; Cleaning Instructions - Homeright FINISH MAX PRO Manual De Instrucciones

FAST START QUICK REFERENCE GUIDE

This is only a quick reference. Read the entire instruction manual prior to using the product.

Spraying Instructions

1
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS
2
2. Thin material as necessary.
(See page 7.) Remove and fill
container with material. Use a filter
to strain material if it is old.
6
6. Plug sprayer into outlet.
Turn sprayer On.

Cleaning Instructions

1
1. Unplug sprayer, remove container,
and empty contents.
3
3. Insert the pick-up tube into the
cylinder housing. See Page 6,
Figure B to determine orientation
of pick-up tube.
7
7. Adjust spray pattern to horizontal or
vertical. (See page 8.)
2
2. Fill sprayer container with cleaning
solution, plug in, turn on and
operate trigger until solution
comes through nozzle.
FINISH MAX PRO FINE FINISH SPRAYER
1. Read all warnings and safety
instructions in the user's manual
before use.
4
4. Attach container to sprayer.
8
8. Set the flow to maximum by
turning the volume control knob
fully clockwise.
3
3. Remove parts. Clean and dry
thoroughly according to Step Two
of the Clean Up instructions. See
page 9.
(C800850)
5
5
5. Insert air hose with locking tabs
into rear of spray gun, turn until
tabs lock into place. Insert other
end of air hose into turbine.
9
HAZARDOUS VAPORS
9. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
ENGLISH