ROTOR INPOWER Serie Manual De Usuario página 38

1.2. OPTION B: SENSOR/NON-DRIVE-SIDE CRANK ASSEMBLY
Sensor/non-drive-side crank assembly contains the power meter unit and specific ANT+ sensor
ID number.
In order to convert your current ROTOR drive-side crank into INpower: drive-side bolt, washer
and self-extractor nut included with the option B package must be used to substitute their
equivalent parts used in the crankset's drive side before installing the power meter.
IMPORTANT: the bolt and self-extractor nut on ROTOR cranks without the power meter ARE
NOT COMPATIBLE with INpower's left crank. The use of an incorrect bolt will damage the
electronics and void the product warranty.
TOOLS NEEDED: assembling a left INpower crank with a right crank of a different ROTOR
model requires:
- 8 mm allen wrench.
- 2 mm allen wrench.
- Cassette wrench (Shimano TL-FW30 or similar).
- Special glue for threads (Loctite 2701 or similar).
Non-drive side crank assembly
WARNING: DO NOT DISASSEMBLE
Product description Product description
38 38
Self-extractor
nut
Drive-side bolt
Washer
Power meter LEFT