FRONT WHEEL ASSEMBLY
Align the front wheel assembly with
the front axle. Push each wheel
assembly firmly on until they click into
place. Pull the front wheel to make
sure it is attached.
NOTE: Check each wheel to make
sure it is secure by pulling it.
NOTE: Wheels are designed not to be
removed.
SWIVEL/LOCK THE FRONT WHEELS
It is recommended the locks are engaged when using on uneven ground.
To lock the wheel: Position the wheel in the trailing position with tab (A) pointing
forwards and lift the swivel lock tab (A) up.
To allow the wheels to swivel: Push the swivel lock tab (A) downwards.
A
USING THE BRAKES
To apply the brakes:
Press down on the middle brake lever (A) with your foot to apply the brakes.
Press down on both outside brake levers to ensure the brakes are fully locked.
A
23
EN