Publicidad
Idiomas disponibles
Idiomas disponibles
100% Customer
Satisfaction Guarantee
If at any time during the first ninety (90) days after the date of
purchase, you are not entirely satisfied with this SentrySafe
product, please call us toll-free at 1-800-828-1438. Dated receipt
required as proof of purchase. We'll solve the problem or
ensure that you receive a replacement or full refund.
--The employees of Sentry Group
Lifetime After-Fire
Replacement Guarantee
If this product is damaged by fire at any time while still owned by
you (the original owner), Sentry Group will ship a replacement
free of charge, if you send the following to Sentry Group,
882 Linden Avenue, Rochester, NY 14625-2784 USA:
• Your name and address;
• A description of the fire, with the model number and a photo
of the burned unit, and a copy of the report from the fire
department, insurance or police.
1 Year Limited Warranty
This product is warranted to the original purchaser for one year (1) from
the date of purchase to be free of structural and mechanical defects due
to faulty materials or workmanship. If a structural or mechanical defect
occurs during the warranty period, Sentry Group (also referred to as
"Sentry") will repair or replace the defective part(s) or product, at its
option, at no charge. Replacement unit is provided with curbside delivery
only. Additional expense for inside delivery is the responsibility of the
consumer. Sentry will not cover additional costs for installation of the
replacement unit.
For Warranty Service (North America only)
Please notify the Sentry Group Customer Service Department of the
problem by phone (at 1-800-828-1438, 8:00 am through 8:00pm EST, M-F)
or in writing to Sentry Group, 882 Linden Avenue, Rochester, New York
14625-2784, U.S.A. Do not ship your product back to Sentry
Group. The Sentry Group Customer Service Department will decide
either to have the product returned, repaired, replaced, or refund your
money.
Proof of Purchase Date
For all Sentry Group products, a dated store receipt is required as proof
of purchase.
Limitations Of Warranty
1. Sentry's responsibility and the buyer's exclusive remedy under this
warranty are limited to the repair or replacement of the defective
part(s) or product, at Sentry's option. In no event shall Sentry be
liable for any incidental or consequential damages (including but not
limited to loss or damage due to fire, water, theft or vandalism) to
persons or property resulting from the breach of this or any other
express or implied warranty applicable to the product. Some states,
provinces and countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
2. Except as may be otherwise provided by applicable law,
Sentry disclaims any and all other covenants and
warranties, whether written or oral, express or implied,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
The implied warranty applicable to this product shall not exceed
the standard one year limited warranty. Some states, provinces
and countries do not allow disclaimers of implied warranties or
limitations on their duration, so the above disclaimer and/or limitation
may not apply to you.
3. Sentry is not responsible for damage, defects, or malfunction to
the product incurred during shipment. The product was packed in
accordance with Interstate Commerce Commission specifications,
and with reasonable handling, should be in good condition on arrival.
Any claims for shipping damage should be made directly to the carrier.
2
4. These warranties do not cover defects, damage, or malfunction
caused by modification, alteration, repair or service of the product by
anyone other than Sentry or its authorized representative, or caused
by physical abuse to or misuse of the product. Sentry specifically
disclaims coverage for damage that may result from the product
being bolted-down and/or damage that may result from the improper
handling of the product during moving and/or installation.
5. No Sentry agent, employee, representative, dealer or retailer has the
authority to make or imply any representation, promise or agreement
which in any way varies the terms of this Limited Warranty.
6. This Limited Warranty shall apply to new, first quality Sentry products
and shall not apply to factory seconds or previously-owned products,
or products previously damaged by such events including,but not
limited to, fire, flood, earthquake, burglary, handling by movers
or installers.
All of the provisions of this Limited Warranty are separate and severable.
If any provision is held invalid and unenforceable, such determination
shall not affect the validity or enforceability of the other provisions. This
Limited Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state, province to province, or
country to country.
ETL verified fire claim
For models starting with: MS, DS, CS, OS, KS
ETL verified for 1 hour fire protection of CDs, DVDs, memory
sticks and USB drives up to 1700°F.
For models starting with: MA, DA, CA, OA
ETL verified for 2 hour fire protection of CDs, DVDs, memory
sticks and USB drives up to 1850°F.
UL-classified fire protection
Your SentrySafe Fire-Safe product is classified by Underwriters
Laboratories, an independent testing organization, to pass one of
the following rigorous standards of fire endurance protection:
• 2-Hour UL Fire Endurance Test
Subjected to temperatures up to 1850°F (1010°C) for 2 hours,
the safe interior will remain below 350°F (177°C) to protect
documents. (This enables your safe to withstand even high-
temperature exposure, as the hottest part of a fire moves
through a building.)
Or
• 1-hour UL Fire Endurance Test
1700°F (927°C) for a duration of one hour.
Plus
• UL Explosion Hazard Test
Subjected to flash fire in a 2000°F (1093°C) furnace for
1
⁄
hour, the safe will not explode or rupture.
2
• UL Fire-Impact Test
After being heated to 1550°F (843°C), the safe is dropped
30 feet onto rubble, then cooled, inverted and reheated to
1550°F (843°C) for
1
⁄
hour. The safe remains intact and locked,
2
with an interior temperature below 350°F (177°C).
Water resistance protection
Some advanced models protect contents from water damage.
The Sentry Group Quality Department has subjected these water
resistant safes to the following conditions:
• tested for 15 minutes with up to 1,000 gallons of water spray
• tested in 6 inches of water for 1 hour.
To validate waterproof models, please call Customer Service at
1-800-828-1438, 8:00am through 8:00pm EST, M-F.
NOTE: For the gasket to work effectively, the safe door
must be closed with the handle fully horizontal.
When you move the handle, the compression of
the gasket will require slightly more force than
you would use with a regular safe.
Instructions for floor mounting
This kit contains:
(2) lag screws, (2) washers, (2) masonry anchors (Fig. A)
Tools needed for floor mounting: Drill, wrench,
7
⁄
" (
11.0 mm) drill bit, for wood anchoring:
16
3
⁄
" (
bit, for masonry anchoring:
9.50 mm) masonry drill bit.
8
Instructions:
1. Tip the safe onto its right side. (Door hinges horizontal with
the floor.)
2. Unlock the safe and open the door.
3. Look on the bottom of the safe for two indentations in
opposite corners. Using the 7⁄16" (11.0 mm) bit, drill a hole
through each indentation perpen-dicular to the bottom of the
safe. (Fig. B)
4. Close the door and tip the safe upright. Place it where
desired and reopen the door.
5. Use a screw or drill bit to mark the floor through both holes.
(Fig. C)
6. Move the safe aside to clear both marked spots for drilling.
7. Drill into the floor:
A. For wood: Using the 9⁄32" (7.2 mm) bit, drill a hole 21⁄2"
(64 mm) deep in each marked spot. (Fig. D)
B. For masonry:
Using the 3⁄8" (9.50 mm) masonry bit, drill a hole 21⁄2"
(64 mm) deep in each marked spot. (Fig. D) Install a masonry
anchor in each hole.
8. Replace the safe in the desired position, with the holes in the
safe aligned with those in the floor.
9. Securing the safe:
A. For wood: Pass each lag screw through a washer, then
through the safe and into a hole. Tighten with the wrench.
(Fig. E)
B. For masonry: Pass each lag screw through a washer,
then through the safe and into a masonry anchor. Tighten with
the wrench. (Fig. F)
A
B
C
D
E
F
9
⁄
"
(7.2 mm) drill
32
Publicidad
