Child-Lock Function; Control Panel View - HJM 641 Instrucciones De Uso

This function only through by Remote control.
2. Press "BLOQ" button light on LED display ,then press "RETARD"
button one time, the "Delay" light and "I/W" light are on. Press "+ , -"
two buttons set the Hours from 01--24(01= 1 o'clock,24=24
o'clock...00=Closed etc.)
---------------------------------------------------------This is open time
3. Press "RETARD" button again, the "Delay" light and "II/H" light are
on. Press "+ , -" two buttons set the Hours from 01--24(01=1
o'clock,24=24 o'clock...00=Closed etc.)
---------------------------------------------------------This is close time
PS: Press "RETARD" button, screen shows number will twinkle 5
seconds, you should operate in time ,otherwise appliance will get back
to standby.
(This function is one-time and must be reset after the power is cut off.)

8) CHILD-LOCK FUNCTION

1. This function only through by Remote control. When appliance are
plug in, this function can be used in any models.
2. Press "BLOQ" button one time, all lights and LED display are
closed ,only "Power" light on. In this condition, both control panel
and remote control are fault use.
3. Press "BLOQ" button again, all lights are on and both control panel
and remote control are use to succeed.

CONTROL PANEL VIEW:

Página 2
9
- 29 -
E
N
G
L
I
S
H