RODE Stereo VideoMic X Manual De Instrucciones página 8

Powering the SVMX
14
The Stereo VideoMic X will run continuously for over 30 hours with
a high quality alkaline or lithium battery. Battery performance may
vary depending on ambient temperature and battery shelf life, so it
is wise to always carry a spare battery. We suggest always installing
a fresh battery when the application is critical, with no opportunity
to re-shoot. Always remember to switch off the Stereo VideoMic X
when not in use, by holding the power button for approximately two
seconds.
Diagram 4 - The power indicator LED will turn red to indicate a low battery level.
Mounting the SVMX
Mounting and connecting your Stereo VideoMic X
The Stereo VideoMic X incorporates a standard camera shoe mount
on the underside of microphone body. The camera shoe mount
has a 3/8" thread at the bottom to additionally allow mounting on
tripods and boompoles.
Some older model and low-cost cameras may produce a higher
level of mechanical noise, which can be picked up by the Stereo
VideoMic X. The integrated high-pass filter should be switched on to
reduce the resulting low frequency rumble.
15