Pressing - Miele professional HM 29-175 Instrucciones De Manejo

Operation
Start ironing by feeding laundry pieces in
by the feed-in table.
Smooth items from the middle outwards to-
wards the edges.
Do not restrict ironing of smaller articles to
any one part of the roller. Make use of the
whole roller width.
Press the foot control bar down for pres-
sing.
The roller does not rotate during pressing.
Pressing is stopped by raising your foot off
the foot control bar.
Freshly ironed laundry can be very hot
when it comes off the ironer. Wear gloves
to protect your hands.
In pauses between ironing, withdraw the
heater plate and reduce the temperature.
Pick-off attachment
The pick-off attachment is used for picking
laundry off the roller. Laundry no longer
needs to be removed manually from the roller.
If one of the pick-off spring lifters is dislocated
by a piece of laundry it should be manually
pushed back into position.
After ironing
After ironing use the residual heat on the hea-
ter plate to iron out the remaining moisture in
the roller covering (approx. 5 mins).
Press the "O" button to switch the machine
off.
Close the gas stopcock (on site).
Switch the machine off at the mains
isolator.
Allow freshly ironed laundry to cool down
before packing it or stacking it to prevent
the risk of very hot laundry igniting and
causing a fire.
13 M.-Nr. 05372840