Introduction; Safety; Main Components - Skymsen SI-315HD-1 Manual De Instrucciones

1. INTRODUCTION

1.1 Safety

If and when the Band Saw Model SI-315HD is not correctly used, it is a potentially
DANGEROUS machine. Cleaning and any other maintenance service shall be carried out by duly
trained people, and with the plug off its socket. To avoid ACCIDENTS follow the instructions below:
1.1.1 Take the electric plug off its socket, before to withdraw any moving part, before
cleaning or any other maintenance service.
1.1.2 Never use any kind of tools, not belonging to the saw to help cutting.
1.1.3 Never touch the saw Blade # 08 (Pct.01), even with the Saw switched off because
the Blade has sharp edges.
1.1.4 Never adjust the Blade Guide # 07 (Pct.01) nor the Thickness Guide # 15 (Pct.01)
with the Blade in movement.
1.1.5 During cutting operation, never use loose clothes with wide sleeves specially
around the wrists.
1.1.6 Use steel gloves during cutting operation.
1.1.7 Keep hands away from moving parts.
1.1.8 Never switch on the Saw with any of its Doors open # 04 or # 17 (Pct.01).
IN AN EMERGENCY CASE USE THE EMERGENCY BUTTON # 03 (Pct.01). To
restart the Band Saw turn the ON/Off Switch # 02 (Pct.01) to OFF position and unlock
the emergency button turning it clockwise.

1.2 Main Components

All components are manufactured with carefully chosen raw materials in
accordance with Siemsen experience and testing standards.
IMPORTANT
02