Intended Use; Li-Ion Battery Charge Status Display - Hilti GDG 6­A22 Manual Del Operador

▶ Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated.
▶ Clean the shank of the accessory tool before inserting it. Make sure that the shank of the accessory
tool is always inserted at least 20 mm into the collet. After inserting the accessory tool, always securely
tighten the clamping nut. An inadequately secured accessory tool could work loose during operation and
fly away from the product.
▶ Use only accessory tools that comply with the specifications in the technical data.
3 Description
3.1 Overview of the product
3.2

Intended use

The product described is a die grinder. It is designed for working on metal. It is designed for grinding and
abrasive cutting, for wire brushing, for polishing and for routing.
Use only accessory tools with a shank diameter appropriate for the collet mounted on the product. Comply
with the information in the technical data.
The product is suitable for dry use only, without water for cooling.
• Use only Hilti lithium­ion batteries of the B 22 series with this product.
• Use only Hilti-approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3 Items supplied
Die grinder, 2 wrenches, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4

Li-ion battery charge status display

The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
*2276758*
1
@
;
=
%
&
(
)
+
§
/
:
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2276758
Clamping nut with collet
Spindle
Neck / front grip
Lockable on/off switch
Grip
Adjusting knob for speed
Battery
Battery release button
Dust filter
Small wrench, 12 mm
Large wrench, 17 mm
English 19