Intended Use; Possible Misuse; Service Indicator - Hilti TE 3000-AVR Manual Del Usuario

Holder for accessory tools
=
(chisels)
Wheels
%

3.3 Intended use

The product described is a hand-held electric breaker with 28 mm hex
chuck. It is designed for chiseling work on concrete, masonry and asphalt.
Excavation and compacting are further possible applications.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.

3.4 Possible misuse

This product is not suitable for working on hazardous materials.
This product is not suitable for working in a damp environment.

3.5 Service indicator

The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Bring the product to Hilti Service in good time. This will help to ensure
that it's always ready for use.
3.6 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system,
which reduces vibration significantly.
3.7 Items supplied
Electric breaker, operating instructions, grease.
The transport trolley is available as an accessory.
You can find other system products approved for your product at your
local Hilti Center or online at: www.hilti.group
*2190684*
Printed: 05.02.2019 | Doc-Nr: PUB / 5364012 / 000 / 01
&
(
Meaning
End of service interval – servicing is
due.
A fault has occurred in the tool.
Protection against overheating
The voltage provided by the electric
supply is too high.
2190684
Wheel securing parts (washer,
retaining pin)
Power tool locating pin
English 7