Care And Maintenance - Blackstone 1555 Manual Del Usuario

Regularly clean your BLACKSTONE Tailgater Combo between uses and especially after extended
periods of storage. Ensure that the BLACKSTONE Tailgater Combo and its components are
sufficiently cool before cleaning.
•
Never handle hot parts with unprotected hands.
•
In order to extend and maintain the life and condition of your BLACKSTONE Tailgater
Combo, we strongly recommend that the unit be covered when left outside for any length of
time, especially during the winter months.
Burner maintenance:
In most circumstances, burning off the residue after cooking will keep the burner clean. The burner
should be removed and cleaned annually or whenever heavy build-up is found in order to ensure that
there is no blockage (debris, insects) in either the burner portholes or venture tubes. Use pipe cleaner
to clear obstructions. A wire brush can be used to remove corrosion from the burner surfaces. When
refitting the burner, be careful to check that the venture tubes of the burner fit over the valve outlets.
Fittings and Storage:
Annual checking and tightening of metal fittings is recommended. Store the BLACKSTONE Tailgater
Combo in a cool dry place. Cover the burners with aluminum foil in order to prevent insects or other
debris from collecting in the burner holes. If the BLACKSTONE Tailgater Combo is to be stored
indoors, the gas bottle must be disconnected and left outside. The gas bottle should always be stored
outside, out of reach of children, and in a dry, well-ventilated area away from any sources of heat
or ignition.
PROBLEM
Burner will not light using the
Auto Strike system.
Burner will not light with a
match.
Fire in burner tube has a low
flame or flashback (a hissing or
roaring noise may be heard)

CARE AND MAINTENANCE

TROUBLE SHOOTING
POSSIBLE CAUSE
1.
LP gas cylinder is empty.
2.
Faulty regulator.
3.
Obstructions in the burner.
4.
Obstructions in gas jets or
gas hose.
5.
Electrode is damaged/faulty
push button igniter.
1.
LG gas cylinder is empty.
2.
Faulty Regulator.
3.
Obstructions in burner.
4.
Obstructions in gas jets or
gas hose.
1.
LP gas cylinder is empty.
2.
Obstructions in burner.
3.
Obstructions in gas jets or
gas hose.
4.
Windy conditions.
23
SOLUTION
1.
Replace with full cylinder.
2.
Have the regulator checked
or replaced.
3.
Clean burner.
4.
Clean jets and gas hose.
5.
Change electrode and wire
change igniter.
1.
Replace with full cylinder.
2.
Have the regulator checked
or replaced.
3.
Clean Burner.
4.
Clean jets and gas hose.
1.
Use larger cylinder.
2.
Clean burner.
3.
Clean jets and gas hose.
4.
Use grill in a more sheltered
position.