Using Other Applications - JVC KD-T812BT Manual De Instrucciones

Using Other Applications

JVC Remote application
You can control the JVC car receiver from the following device using
JVC Remote application.
• KD-T812BT: iPhone/iPod touch (via Bluetooth or via USB input terminal) or
Android device (via Bluetooth)
• KD-T716BT: Android device (via Bluetooth)
For more information, visit <http://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1 Start up the JVC Remote application on your device.
2 Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 13)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 8)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 13)
(Make sure the USB input terminal is not connected to any device.)
3
Select the device to use from the menu.
See the following "Settings to use JVC Remote application".
For KD-T812BT: By default, [ANDROID] is selected. To use iPhone/
iPod touch, select [YES] for [IOS].
Settings to use JVC Remote application
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
12
ENGLISH
3
Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
[REMOTE APP]
[SELECT] (For KD-T812BT)
Selects the device ([IOS] or [ANDROID]) to use the application.
[IOS] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/
iPod touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID] [YES]: Selects Android device to use the application via Bluetooth. ;
[NO]: Cancels.
[ANDROID Selects the Android device to use from the list.
LIST] • For KD-T812BT: Displayed only when [ANDROID] of [SELECT] is set to [YES].
[STATUS] Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No iOS device is connected to use the application.
[ANDROID CONNECTED]: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
.
Default: [XX]