RIDGID R82234 Manual Del Operador página 12

OPERATION
DRIVINg OR REMOVINg SCREWS
See Figure 11, page 17.
 Place the direction of rotation selector in the correct posi-
tion for the operation.
 Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
 As screw is driven, impacting will begin.
WARNINg:
Do not drive a screw where there is likely to be
hidden wiring behind the surface. Contact with a
"live" wire will make exposed metal parts of the tool
"live" and possibly shock the operator. If you must
drive a screw where hidden wire may be present,
always hold tool by insulated gripping surfaces
(handle) when performing the operation to prevent
a shock to the operator, as seen in figure 11.
12 - English