Setting An Automatic Oven Function - Haier HCW3460AES Manual Del Usuario

As soon as the oven starts, the preheat LED (indicated by the bars) on the bottom
of the clock display starts flashing and becomes steadily on when the preheat ends
with a beep.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will
show OFF for a few seconds.

SETTING AN AUTOMATIC OVEN FUNCTION

Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
After selecting an Oven Mode, you can program the oven for Timed cooking. The
Timed cooking program will remain set even if you change the Oven Mode with the
exception of the Self-Clean mode.
The following possibilities are available:
1. Timed cooking setting the cooking time (duration).
2. Timed cooking setting the end of cooking time (stop time).
3. Delayed cooking setting duration and stop time.
Push the knob to toggle between cooking duration (cook time) and end of cooking
time (stop time): the words "dur" or "End" are displayed respectively.
Turn the knob left/right to adjust the duration or the stop time when the proper
word is displayed:
1. When "dur" is displayed, the control shows 30 minutes as the default cooking
duration. Turn the knob left/right to set the desired cooking time in a range
between 0 and 240 minutes. The display will flash "dur" and its value alternately
for a few seconds then it will show the time-of-day, the pot symbol and the
"A" letter to indicate that a timed cooking is active. The end of cooking time is
updated automatically.
2. When the word End is displayed, the control shows the current time as the initial
stop time. To set the desired end-of-cooking time:
•
Turn the +/- knob left/right and the hours will flash.
•
Adjust the hours by turning the knob left/right.
•
Push in on the knob to toggle back and forth between hours and minutes or
wait a few seconds until the minutes flash.
•
Adjust the minutes by turning the knob left/right.
•
Wait until the new End of Cooking time value stops flashing.
The display will flash End and its value alternately for a few seconds, and then it
will show the time of day, the
cooking is active. The cooking duration is updated automatically.
WARNING
Food Poisoning Hazard
symbol and the "A" letter to indicate that a timed
17